GW Instek PEL-2000 Series Programming User Manual - Manual (Page 41)

COMMAND DETAILS
41
Query Example :CONF:AUTO:LOAD?
1 Auto load is On.
:CONFigure:AUTO:MODE All channels
Description Configures the Auto Load mode as (run) Program
or Load.
Syntax :CONFigure:AUTO:MODE PROGRAM/0, LOAD/1
Parameter PROGRAM/0, LOAD/1 Auto Load Mode
PROGRAM/0 PROGRAM
LOAD/1 LOAD
Example :CONF:AUTO:MODE 1 Configures Auto Load to
LOAD
Query Syntax :CONFigure:AUTO:MODE?
Return Parameter Auto Load Type Status
0 PROGRAM MODE
1 LOAD MODE
Query Example :CONF:AUTO:MODE?
1 Auto load mode is to
LOAD mode.
:CONFigure:SOUND
Channel Specific
Command
Description Sets the sound of each load module on or off.
Syntax :CONFigure:SOUND {OFF|0|ON|1}
Parameter OFF/0 Off
ON/1 On
Example :CONF:SOUND ON Configures the sound for
the specific channel to
On.
Query Syntax :CONFigure:SOUND?