GW Instek PEL-2000 Series Programming User Manual - Manual (Page 132)

PEL-2000 Programming Manual
132
MAX Sets the voltage to the
maximum value for the
channel
Example :VOLT:AVAL 10V Sets A Value to 10 volts
for the specific channel
:VOLT:BVAL MAX Sets B Value to the
maximum allowed
voltage for the specific
channel. (single channel
only)
Query Syntax :VOLTage:AVALue/BVALue? [MAX|MIN]
Return Parameter 1 unit = 1 volt Voltage
10 Returns the voltage of the
specific channel.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :VOLT:AVAL?
5
:VOLT:AVAL? MAX
81.6000 A Value is set to 5 volts.
Returns the maximum
settable voltage.
:VOLTage:CURRent
Channel Specific
Command
Description Sets the current limit in CV mode.
Syntax :VOLTage:CURRent [ A ]
Parameter [ A ] Current limit
1 1 Amp
1A 1 Amp
MIN Sets the current limit to
the minimum value for the
channel