GW Instek PEL-2000 Series Programming User Manual - Manual (Page 43)

COMMAND DETAILS
43
Parameter OLD/0 Old
UPDATED/1 Updated
Example :CONF:LOAD OLD Configuration type set as
OLD.
Query Syntax :CONFigure:LOAD?
Return Parameter Configuration type
0 Old
1 Updated
Query Example :CONF:LOAD?
0 Sets the load module
selector configuration
type as OLD.
:CONFigure:PROTection:CURRent:STATe
Channel Specific
Command
Description Sets the current protection for the specific channel
on or off. The current protection can also be
cleared.
Syntax :CONFigure:PROTection:CURRent:STATe
{OFF|0|ON|1|CLEAR|2}
Parameter CLEAR/2 Cleared
OFF/0 Off
ON/1 On
Example :CONF:PROT:CURR:STAT 1 Turns on current protection.
Query Syntax : CONFigure:PROTection:CURRent:STATe?
Return Parameter Current Protection
0 Off
1 On
2 Clear
Query Example :CONF:PROT:CURR:STAT?
1
Current protection is
turned on.