GW Instek PEL-2000 Series Programming User Manual - Manual (Page 68)

PEL-2000 Programming Manual
68
Syntax :CURRent:DYNamic:HIGH:L1/L2 [A]
Parameter NRf+[A]
L1 10 Sets L1 to 10 Amps. (High
range only)
L2 20 Sets L2 to 20 Amps. (High
Range only)
L1/L2 MIN Sets L1 or L2 to the
minimum level for the
specific channel.
L1/L2 MAX Sets L1 or L2 to the
maximum Level for the
specific channel.
Example :CURR:DYN:HIGH:L1 10 In high range CC
dynamic mode, Set L1
(level 1) to 10 amps.
Query Syntax :CURRent:DYNamic:HIGH:L1/L2? [MIN|MAX]
Return Parameter [MAX|MIN] Return value
1 unit= 1 amp Returns the current of
Level 1/ 2 (L1/L2).
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:DYN:HIGH:L2?
MAX
20.4000 Returns the maximum
current allowed for the
channel. (PEL-2020)
:CURRent:DYNamic:HIGH:RISE/FALL
Channel Specific
Command
Description Sets the high range rising/falling slew rate for CC
dynamic mode for the specific channel.
Syntax :CURRent:DYNamic:HIGH:RISE/FALL [A/uS]
Parameter [A/uS] Slew Rate
RISE/FALL 0.8A/uS Sets the rising/falling slew
rate to 0.8A/uS