GW Instek PEL-2000 Series Programming User Manual - Manual (Page 69)

COMMAND DETAILS
69
RISE/FALL 1 Sets the rising/falling slew
rate to 1A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :CURR:DYNA:HIGH:RISE
1.1 Sets the rising slew rate
to 1.1A/uS.
Query Syntax : CURRent:DYNamic:HIGH:RISE/FALL? [MIN|MAX]
Return Parameter [MAX|MIN] Slew rate
1 Unit = 1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:DYN:HIGH:FALL?
MAX
0.8 For high range dynamic
CC mode, the maximum
value for the falling slew
rate is 0.8 A/uS for the
specific channel.
:CURRent:DYNamic:HIGH:T1/T2
Channel Specific
Command
Description Sets the timers T1 or T2 for CC dynamic mode for
the specific channel in high range.
Syntax :CURRent:DYNamic:HIGH:T1/T2 [S|ms]
Parameter [S] Time
T1/T2 0.1S Sets the T1/T2 time to 0.1
seconds.
T1/T2 1 Sets T1/T2 to 1 second.
T1/T2 MIN Sets the T1/T2 to the
minimum value.
T1/T2 MAX Sets the T1/T2 time to the
maximum time