GW Instek PEL-2000 Series Programming User Manual - Manual (Page 58)

PEL-2000 Programming Manual
58
Query Example :CURR:STAT:L2? 2 Returns the current
setting (2 A) for B Value.
:CURRent:STATic:RISE/FALL
Channel Specific
Command
Description Sets the slew rate for constant current static mode.
The command is range dependant. If the current
range is Low, then the command will only apply to
the low range settings.
Syntax :CURRent:STATic:RISE/FALL [A/uS]
Parameter [A/uS] Slew Rate
RISE/FALL 0.078A/uS Sets the rising/falling slew
rate to 0.078A/uS
RISE/FALL 1 Sets the rising/falling slew
rate to 1A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :CURR:STAT:RISE .01 Sets the rising slew rate
to 0.01A/uS.
Query Syntax : CURRent:STATic:RISE/FALL? [MIN|MAX]
Return Parameter [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:STAT:RISE? MIN
0.078 the Minimum value for
the rising slew rate is
0.078 A/uS for the
specific channel.
Query Example :CURR:STAT:RISE?
0.16800 The rising slew rate is
0.168 A/uS for the
specific channel.