GW Instek PEL-2000 Series Programming User Manual - Manual (Page 42)

PEL-2000 Programming Manual
42
Return Parameter SOUND Status
0 Off
1 On
Query Example :CONF:SOUND?
0 Sound is off for the
specific channel.
:CONFigure:REMote All Channels
Description Turns remote control on or off for all interfaces.
Syntax :CONFigure:REMOTE {OFF|0|ON|1}
Parameter OFF/0 Off
ON/1 On
Example :CONF:REM 1 Turns Remote control
on.
:CONFigure:SAVE All Channels
Description This command is for compatibility with other
instruments only and has no action.
Syntax :CONFigure:SAVE
Example :CONF:SAVE Saves the configuration
data for all channels into
internal memory.
:CONFigure:LOAD
System Command
Description Configures the load module selector knob as OLD
or Updated.
Syntax :CONFigure:LOAD {OLD|0|UPDATED|1}
Example :CONF:LOAD UPDATED Sets the load module
selector knob as
Updated.