GW Instek PEL-2000 Series Programming User Manual - Manual (Page 29)

COMMAND DETAILS
29
Query Example *OPC?
1 All pending operations
are completed.
*RCL Status Command
Description The Recall Instrument State command restores the
instrument settings from a previously saved
memory setting.
Syntax *RCL
Parameter Recall Memory Setting
1~120 1~120
Example *RCL 1 Recalls Setting memory 1
*RDT? System Command
Description Returns the load module type in each channel in
order from 1~8. If no frame is present a 0 is
returned.
Query Syntax *RDT?
Return Parameter Occupied Channel
2020L PEL-2020 left channel
0 Empty channel
Query Example *RDT?
0,0,2020L,2020R,0,0,0,0 Channels 1-2 and 5-8 are
empty; 3-4 is occupied
by the PEL-2020 load
module.
*RST Status Command
Description Resets the mainframe by forcing the ABORt, *CLS,
and LOAD:PROT:CLE command.
Syntax *RST
Example *RST