GW Instek PEL-2000 Series Programming User Manual - Manual (Page 144)

PEL-2000 Programming Manual
144
Example :MEM:SAVE:PROG 100
Saves the channel to
Memory M100.
:MEMory:SAVE:ALLPreset All Channels
Description Saves preset data to internal memory for all
channels.
Syntax :MEMory:SAVE:ALLPreset:
Parameter Preset no.
0~9 P0~P9
Example :MEM:SAVE:ALLP 0 Saves the preset settings
to (P0) for all channels.
:MEMory:SAVE:SETup All Channels
Description Saves setup data for all channels to internal
memory slots S1~S4.
Syntax :MEMory:SAVE:SETup:
Parameter Setup data
1~4 S1~S4
Example :MEM:SAVE:SET 1 Saves the setup data to
S1 (applicable to all
channels).
:MEMory:RECall:PREset
Channel Specific
Command
Description Recalls preset data for the specific channel from
internal memory slots P0~P9.
Syntax :MEMory:RECall:PREset:
Parameter Preset no.
0~9 P0~P9