GW Instek PEL-2000 Series Programming User Manual - Manual (Page 48)

PEL-2000 Programming Manual
48
:CONFigure:PROTection:UVP:LEVel
Channel Specific
Command
Description Sets the under voltage protection level for the
current/specific channel. The level can be set to
any applicable level or to the channel
maximum/minimum.
Syntax :CONFigure:PROTection:UVP:LEVel
[W]|MIN|MAX
Parameter UVP Level
20 20 Volts
20V 20 Volts
MIN Sets to the minimum level
(OFF)
MAX Sets the voltage limit to
the maximum level
Example :CONF:PROT:UVP:LEV MIN Sets the UVP limit to OFF
Query Syntax :CONFigure:PROTection:UVP:LEVel? [MIN|MAX]
Return Parameter Power protection level
1 unit = 1 volt Returns the UVP level as
volts.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CONF:PROT:UVP:LEV?
75
UVP level is at 75 volts.
:CONFigure:RESPonse
Channel Specific
Command
Description Sets or queries the response rate for the specific
channel.
Syntax :CONFigure:RESPonse {NORMAL|0|FAST|1}
Parameter NORMAL/0 Normal
FAST/1 Fast