GW Instek PEL-2000 Series Programming User Manual - Manual (Page 151)

COMMAND DETAILS
151
1 unit = 1 ohm Returns the resistance
value.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :SEQ:POIN:RES?
100 The resistance value is
100 ohm.
:SEQuence:POINt:CURRent
Channel Specific
Command
Description Sets the current value for the current point. CC
mode only.
Syntax :SEQuence:POINt:CURRent [A]|MIN|MAX
Parameter [A], MIN, MAX Current value
10 10A
100 A 100A
MAX/MIN Maximum or minimum
value.
Example :SEQ:POIN:CURR 1 Sets the current to 1.
Query Syntax :SEQuence:POINt::CURRent? [MAX|MIN]
Return Parameter Current Value
1 unit = 1 A Returns the current value.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :SEQ:POIN:CURR?
1 The current value is 1
amp.
:SEQuence:POINt:RISE/FALL
Channel Specific
Command
Description Sets the rising and falling slew rates for the current
point.
Syntax :SEQuence:POINt:RISE/FALL[A/us]|MIN|MAX
Parameter [A/us], MIN, MAX Slew rate