GW Instek PEL-2000 Series Programming User Manual - Manual (Page 46)

PEL-2000 Programming Manual
46
MIN Sets to the minimum level
MAX Sets the voltage limit to
the maximum level
Example :CONF:PROT:VOLT:LEV MAX Sets the voltage limit to
81.6V (PEL2020)
Query Syntax : CONFigure:PROTection:VOLTage:LEVel? [MIN|MAX]
Return Parameter 1 unit = 1 volt Voltage protection level
1.00 1.00 volts.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CONF:PROT:VOLT:LEV?
81.6000 Voltage protection level
is at 81.6V.
:CONFigure:PROTection:POWer:STATe
Channel Specific
Command
Description Sets the power protection for the current/specific
channel on or off. The power protection can also be
cleared.
Syntax :CONFigure:PROTection:POWer:STATe
{OFF|0|ON|1|CLEAR|2}
Parameter CLEAR/2 Cleared
OFF/0 Off
ON/1 On
Example :CONF:PROT:POW:STAT 1 Turns on power protection.
Query Syntax : CONFigure:PROTection:POWer:STATe?
Return Parameter Power Protection
0 Off
1 On
2 Clear
Query Example :CONF:PROT:POW:STAT?
1
Power protection is
currently on.