GW Instek PEL-2000 Series Programming User Manual - Manual (Page 129)

COMMAND DETAILS
129
Example :STAT:QUES:NTR 5 OC (Bit 1) and OP (Bit 3)
are set as negative
transitions.
:STAT:CHAN:PTR 2 OV (Bit 2) is set as a
positive transition.
Query Syntax :STATus:QUEStionable:NTRansition/PTRansition?
Return Parameter Event Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not used
Query Example :STAT:QUES:NTR?
4 Returns which
conditions (OP) have
negative transitions.
:STATus:PREset
Channel Specific
Command
Description The status preset command resets the Enable
registers and NTR/PTR registers from the Channel
Status and Questionable Status Register groups.
Preset Register Preset
Channel Status Enable All bits set to 1
Channel Status PTR All bits set to 1
Channel Status NTR All bits set to 0
Questionable Status Enable All bits set to 0
Questionable Status PTR All bits set to 1
Questionable Status NTR All bits set to 0
Syntax :STATus:PREset
Example :STAT:PRE