GW Instek PEL-2000 Series Programming User Manual - Manual (Page 71)

COMMAND DETAILS
71
FETCH Subsystem
:FETCh:VOLTage? .......................................................... 71
:FETCh:CURRent? ........................................................... 71
:FETCh:POWer? .............................................................. 72
:FETCh:STATus? ............................................................. 72
:FETCh:ALLVoltage? ....................................................... 72
:FETCh:ALLCurrent? ....................................................... 73
:FETCh:ALLPower? ......................................................... 73
:FETCh:VOLTage?
Channel Specific
Status Command
Description This query returns the real-time voltage of the load
module input for the specific channel.
Syntax :FETCh:VOLTage?
Parameter 1 unit = 1 volt Voltage
8 8 volts
Query Example :FETC:VOLT?
11.2 The specific channel has
a voltage of 11.2 volts at
the input.
:FETCh:CURRent?
Channel Specific
Status Command
Description This query returns the real-time current of the load
module input for the specific channel.
Syntax :FETCh:CURRent?
Parameter 1 unit= 1 amp
1 1 amp
Query Example :FETC:CURR?
1.2 The specific channel has
a current of 1.2 amps at
the load module input.