GW Instek PEL-2000 Series Programming User Manual - Manual (Page 140)

PEL-2000 Programming Manual
140
Query Example :POWer:HIGH:BVAL? AX
2 Returns the maximum
power allowed for the
channel/range.
:POWer:HIGH:CURRent
Channel Specific
Command
Description Sets the current limit for constant power mode for
the high range only.
Syntax :POWer:HIGH:CURRent [A]
Parameter [A]
1 Sets the current limit to
1A.
1A Sets the current limit to
1A.
MIN Sets the current limit to
the minimum level for the
specific channel.
MAX Sets the current limit to
the maximum level for the
specific channel.
Example :POW:HIGH:CURR 1 Sets the current limit to
1A.
Query Syntax :POW:HIGH:CURRent? [MAX|MIN]
Return Parameter [MAX|MIN] Current
1 unit = 1 amp Returns the current limit.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :POW:HIGH:CURR?
7.0 Returns the current limit
for the specific channel.