GW Instek PEL-2000 Series Programming User Manual - Manual (Page 157)

COMMAND DETAILS
157
Example :SEQ:TRIG:IN 0 Trigger IN is on.
Query Syntax :SEQuence:TRIGger:IN?
Return Parameter Trigger IN
0 Off
1 On
Query Example :SEQ:TRIG:IN?
1 Trigger IN is on.
:SEQuence:TRIGger:OUT
Channel Specific
Command
Description Turns the trigger output on for the selected
channel for sequences. Note that one channel must
be set for trigger out.
Syntax :SEQuence:TRIGger:OUT |MIN|MAX
Parameter Channel number
MAX Sets TRIG OUT to the last
channel
MIN Sets TRIG OUT to the
first channel
Example :SEQ:TRIG:OUT 1 Sets TRIG OUT to CH1.
Query Syntax :SEQuence:TRIGger:OUT?
Return Parameter Channel number
MAX/MIN Last or first channel.
Query Example :SEQ:TRIG:OUT?
1 CH1 is set to TRIG OUT.
:SEQuence:TRIGger:IN:CHANnel
Channel Specific
Command
Description Selects which channels are turned on/off with
the :SEQuence:TRIGger:IN command. The bit
weight of the value determines which
channels are used.