GW Instek PEL-2000 Series Programming User Manual - Manual (Page 55)

COMMAND DETAILS
55
0 Old
1 Updated
Query Example :UTIL:LOAD? 1 The knob style is set to
Updated.
:UTILity:IDENtify System Command
Description Flashes a message “I am Here!” on the mainframe
display. This command is useful to identify a PEL-
2000 mainframe in a group. Pressing any key on
the mainframe will also turn the message off.
Syntax :UTILity:IDENtify {OFF|0|ON|1}
Parameter OFF/0 Turns message off
ON/1 Turns message on
Example :UTIL:IDEN 1 Turns the message on.
:UTILity:FRAMe System Command
Description Turns Frame Link on or off.
Syntax :UTILity:FRAMe {OFF|0|ON|1}
Parameter {OFF|0|ON|1} Frame Link
OFF/0 off
ON/1 on
Example :UTIL:FRAM 1 Turns Frame Link on.
Query Syntax :UTILity:FRAMe?
Return Parameter Frame Link
0 Off
1 On
Query Example :UTIL:FRAM?
0 Frame Link is on.