Appn – IBM SC30-3865-04 User Manual
Page 87
-------------------------------------------------------------
COS:
COS NAME
--------
BATCH
BATCHSC
CONNECT
INTER
INTERSC
CPSVCMG
SNASVCMG
MODE NAME COS NAME
---------------------
PORT:
INTF
PORT
LINK
HPR
SERVICE
PORT
NUMBER
NAME
TYPE
ENABLED
ANY
ENABLED
------------------------------------------------------
0
TR000
IBMTRNET
YES
YES
YES
**** < this is the Primary port
1
FR001
FR
YES
YES
YES
7
**** < this is the alternate port
4
PPP004
PPP
YES
YES
YES
8
STATION:
STATION
PORT
DESTINATION
HPR
ALLOW ADJ NODE
NAME
NAME
ADDRESS
ENABLED CP-CP
TYPE
------------------------------------------------------------
TONN25
FR001
132
YES
YES
0
TONN31
FR001
141
YES
NO
0
TONN103
FR001
153
YES
NO
0
**** < this is the alternate to NN6
TONN6WRR
PPP004
000000000000
YES
YES
0
9
**** < this is the Primary to NN1
TONN1PRI
FR001
121
YES
YES
0
10
LU NAME:
LU NAME
STATION NAME
CP NAME
------------------------------------------------------------
APPN config> ex
************************************************************************
************************************************************************
************************************************************************
Config>
************************************************************************
**** The configuration is NN22---primary FR
****
---Alternate WRR to NN6
****
** This is the NN6 configuration which is the destination side for the
* NN22 Wan Reroute
* interface 17 has the ISDN lid for 2210-22 so when NN22 calls into NN6,
* it will map to interface 17
*
************************************************************************
11
Config> n 17
Circuit configuration
FR Config>fea
li all
Base net
= 6
Destination name
= 2210-22
Circuit priority
= 8
Inbound destination name
= 2210-22
Inbound calls
= allowed
Idle timer
= 0 (fixed circuit)
SelfTest Delay Timer
= 150 ms
FR Config>ex
**** on this side, the interface must be ENABLED all the time
Config>ena in 17
Interface enabled successfully
************************************************************************
* Define the APPN PORT; NN22 will call into NN6 and dynamically create
* the linkstation when NN22 does a Wan Reroute.
*
************************************************************************
Config>p appn
APPN user configuration
APPN
Chapter 1. APPN
57