IBM SC30-3865-04 - Manual (Page 207)

Table 31. Configuration Parameter List - Connection Network Configuration for
ATM (continued)
Parameter Information
Parameter
Connection network TG number
Valid Values
1 to 239
Default Value
None
Description
This parameter specifies the TG number uniquely identifying this connection from the
local port to the CN. The CN name and TG number pair must be unique.
Parameter
Limited Resource
Valid Values
Yes or No
Default Value
Yes
Description
This parameter indicates if this TG should be brought down when not in use by session
traffic.
Parameter
Limited Resource Timer
Valid Values
1 to 2160000 seconds
Default Value
180 seconds
Description
This parameter indicates the time limit after which this CN TG should be brought down
when not in use by session traffic.
Parameter
LDLC retry count
Valid Values
1 to 255
Default Value
3
Description
This parameter is used in conjunction with the LDLC timer period to provide reliable
delivery of XIDs. The retry count is initialized when a command or request is first
transmitted over the link. If the LDLC timer period expires before a response is
received, the command or request is retransmitted, the retry count is decremented, and
the LDLC timer period is restarted. If the timer expires with the retry count at 0, the link
is assumed to be inoperative.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 177