IBM SC30-3865-04 - Manual (Page 341)

the set of receive-passwords is processed through the IS; any incoming
packets whose passwords do not match are dropped.
Example:
add receive-password
Note: You get an error message if you use an invalid password type.
Password type [Domain]:
Password [ ]:
Reenter password:
Password type
Designates one of the two types of passwords, domain or area.
Domain passwords are used with L2 LSPs (Level 2, Link State
Packets) and SNPs (Sequence Number PDU).
Area passwords are used with L1 LSPs and SNPs.
Password
Designates the character string that you are using for
authentication. Maximum allowable string is 16 characters.
template template-name routing-circuit-name destination-DTE call-UserData
Creates a template by which the router makes outgoing calls on a static-out
routing circuit. Templates for static-out circuits are analogous to filters for
static-in circuits.
The template-name is the name you give the template. The
routing-circuit-name is the name of the routing circuit with which the
template is associated.
The destination-DTE is an address for the remote router of up to 14 digits.
The call-UserData must match the call data set up for a filter on the remote
circuit. Call-UserData can have one of three values - osi, dec, or user:
v For osi the router automatically configures an ISO protocol discriminator
for the call data and requires the call to go to an OSI router.
v For dec the user data identifies the outgoing calls as coming from a
Digital Equipment Company router.
v For user you are prompted for an additional entry of up to 16 octets.
Enter text to match the user data of the appropriate filter on a remote
router.
Example:
add template
Template Name []?
Routing Circuit Name []?
DTE Address []?
Call UserData (OSI/DEC/USER) ?
If you choose user this additional prompt appears:
(max 16 octets) [] ?
Enter up to 16 octets of text for user data.
Change
Allows you to modify the parameters of ISO/DNV records created in the permanent
database.
DECnet V/OSI Configuration Commands (Talk 6)
Chapter 10. Configuring and Monitoring OSI/DECnet V 311