IBM SC30-3865-04 - Manual (Page 171)

Table 20. Configuration Parameter List - Port Default TG Characteristics (continued)
Parameter Information
Parameter
Cost per byte
Valid Values
0 to 255
Default Value
For ATM SVCs and ATM PVCs:
Campus ATM best effort
0
Campus ATM reserved
0
WAN ATM best effort
128
WAN ATM reserved
0
For IP: 0 for Campus and WAN
For all other: 0
Description
This parameter specifies the cost per byte TG characteristic for all link stations defined
on this port.
The cost per byte TG characteristic expresses the relative cost of transmitting a byte
over the associated TG. The units are user-defined and the assigned value should
reflect the actual expenses incurred for transmitting over the TG relative to all other
TGs in the network. A value of zero means that bytes may be transmitted over the TG
at no additional cost. Higher values represent higher costs.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 141