IBM SC30-3865-04 - Manual (Page 55)

Enterprise Extender Support for HPR over IP
Enterprise Extender support for HPR over IP allows HPR/APPN applications to run
over an IP backbone network and still take advantage of APPN Class of Service.
HPR over IP encapsulates HPR data into a UDP/IP packet for delivery over the IP
network.
Supported DLCs
Table 2 shows the DLC ports supported by the device over APPN:
Table 2. Port Types Supported for APPN Routing
Port Type Standard HPR ISR DLUR*
Ethernet Version 2 Yes Yes Yes
Ethernet IEEE 802.3 Yes Yes Yes
TR 802.5 Yes Yes Yes
Serial PPP Yes Yes No
Serial FR (bridged and
routed) ** Yes Yes Yes
Frame Relay BAN Yes Yes Yes
Serial LAN bridging NA NA NA
SDLC No Yes Yes
X.25 CCITT X.25 No Yes Yes
DLSw (remote only) *** No Yes Yes
APPN/PPP/ISDN Yes Yes No
APPN/FR/ISDN Yes Yes Yes
APPN/PPP/V.25bis Yes Yes No
APPN/PPP/V.34 Yes Yes No
LANE Forum compliant Yes Yes Yes
ATM Yes No Yes
HPR over IP Yes No Yes
100Mbps Ethernet Yes Yes Yes
100Mbps TR 802.5 Yes Yes Yes
Notes:
1. * This column refers to the port providing the connection to the downstream PU
(DSPU).
2. ** Use bridged format when you have two devices connected by frame relay
and one of them does not have APPN. Otherwise, use routed format because of
improved performance.
3. *** Since APPN runs over DLSw and DLSw runs over X.25, you can route
APPN ISR traffic over X.25 by running APPN over DLSw.
Router Configuration Process
This section describes the router configuration process and includes details about
parameters.
APPN
Chapter 1. APPN 25