IBM SC30-3865-04 - Manual (Page 348)

list adjacencies
Ifc Area Address System ID MAC Address
0 0001-0203-0405 0001-0203-0405
1 0002-4000-0000 0000-0019-3004
Ifc Indicates the interface number that connects to the adjacency.
Area Address
Indicates the area address of this ES adjacency.
System ID
Indicates the portion of the NET that identifies the adjacency.
MAC Address
Indicates the MAC address (SNPA) of the adjacency.
algorithm
Displays the routing algorithm that is configured in SRAM for the DNA V
protocol. If you are running the OSI protocol only, this parameter is
unsupported.
Example:
list algorithm
Level 1 algorithm LINK_STATE
Level 2 algorithm DISTANCE_VECTOR
Level 1 Algorithm
Indicates the current configuration of the routing algorithm for level
1, Link State (default) or Distance Vector.
Level 2 Algorithm
Indicates the current configuration of the routing algorithm for level
2, Link State or Distance Vector (default).
Note: Depending on whether DNA IV is enabled or disabled, the
routing algorithm displayed here may be different from what
is running on the router.
alias Displays the configured aliases and their corresponding address segments.
Example:
list aliases
Alias Segment Offset
joplin AA0004000104 1
moon 0000931004F0 1
trane 000093E0107A 1
filter Displays the defined filters for X.25 circuits.
Example:
list filters
Rout Cir Name Filter Name DTE Addr Pri Call Data
routeCir2 filter1 25 5 81
globals
Displays the router’s current NET, area addresses, switch settings, global
parameters, and timer configuration.
Example:
list globals
DNAV State: Enabled* Network Entity Title: 4700050001:0000931004F0
Manual Area Addresses:
1. 4700050001 2. 7700050011
Switches:
ESIS Checksum = On ESIS Init Option = Off
Authentication = Off
Globals:
IS Type = L2 System ID Length = 6
DECnet V/OSI Configuration Commands (Talk 6)
318 MRS V3.2 Protocol Config Ref Vol 2