Appn configuration commands 106 – IBM SC30-3865-04 User Manual
Page 136
Table 10. Configuration Parameter List - Node Level Traces (continued)
Parameter Information
Parameter
Timer service
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about requests for timer service
from the APPN network node.
Parameter
Service provider management
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about the definition and enabling or
disabling of services within the APPN network node.
Parameter
Inter-process message segmenting
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about the buffer transfer and
freeing of chained messages within the APPN network node.
Parameter
Control of processes outside scope of this tower
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about the definition and activation
of processes external to this APPN network node, such as when the node operator
facility (NOF) defines the external process configuration control.
APPN Configuration Commands
106
MRS V3.2 Protocol Config Ref Vol 2