IBM SC30-3865-04 - Manual (Page 424)

path-mtu-aging-timer
Specifies the aging time in minutes for path MTUs that have been
determined using path MTU discovery.
Valid Values: 10 - 60 minutes, where 0 = disable
Default Value: 10
reassembly-size
Specifies the size of the reassembly buffers used for processing the
fragment header.
Valid Values: 2048 - 65536
Default Value: 12000
router-id
Specifies the IPv6 address of the router.
Valid Values: Any valid IPv6 address
Default Value: None
routing table-size
number of nets
Valid Values: 64 - 65 535
Default Value: 768
ttl Specifies the IPv6 time-to-live value.
Valid Values:
Default Value: 64
Update
Use the update command to update the packet filter
Syntax:
update packet-filter
packet-filter
Use this command to access the Packet-filter 'xx' Config> command
prompt from which you can configure packet-filters.
Update Packet-filter Commands
Table 67. Update Packet-filter Configuration Command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on page
xxvi.
Add Adds access control.
Change Changes access control.
Delete Deletes access control.
Move Reorders the access control list applied to the packet filter.
List
Exit
Returns you to the previous command level. See “Exiting a Lower Level
Environment” on page xxvii.
IPV6 Configuration Commands (Talk 6)
394 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
||
||
||
|
|
||
||
||
||
||
||
|