IBM SC30-3865-04 - Manual (Page 180)

Table 23. Configuration Parameter List - Link Station - Detail (continued)
Parameter Information
Parameter
Link station name (required)
Valid Values
A string of 1 to 8 characters :
v First character: A to Z
v Second to eighth characters: A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name of a link station that represents the TG (link)
between the router network node and the adjacent node. The link station name must
be unique within this network node.
Parameter
Port name
Valid Values
A unique unqualified name that is automatically generated.
The name will consist of:
v TR (token-ring)
v EN (Ethernet)
v DLS (DLSw)
v FR (frame relay)
v X25 (X.25)
v SDLC (SDLC)
v PPP (point-to-point)
v IP
followed by the interface number.
Default Value
The name of the port that this link station is defined on.
Description
This parameter specifies the name representing the port this link station is defined on.
The port must already have been configured for APPN.
APPN Configuration Commands
150 MRS V3.2 Protocol Config Ref Vol 2