IBM SC30-3865-04 - Manual (Page 191)

Table 24. Configuration Parameter List - Station Configuration for ATM (continued)
Parameter Information
Parameter
LDLC retry count
Valid Values
1 — 255
Default Value
3
Description
This parameter is used in conjunction with the LDLC timer period to provide reliable
delivery of XIDs. The retry count is initialized when a command or request is first
transmitted over the link. If the LDLC timer period expires before a response is
received, the command or request is retransmitted, the retry count is decremented, and
the LDLC timer period is restarted. If the timer expires with the retry count at 0, the link
is assumed to be inoperative.
Parameter
LDLC Timer Period
Valid Values
1 — 255 seconds
Default Value
For ATM: 1 second
For IP: 15 seconds
Description
This parameter specifies the timer period used with the LDLC retry count.
Parameter
VPI
Valid Values
0 — 255
Default Value
0
Description
This parameter identifies the VPI of the PVC at the interface.
Parameter
VCI
Valid Values
0 —65535
Default Value
0
Description
This parameter identifies the VCI of the PVC at the interface.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 161