IBM SC30-3865-04 - Manual (Page 418)

Syntax:
delete address address
leaked-routes destination
packet-filter name
route destination mask gateway
tunnel tunnel#
Disable
Use the disable command to disable ICMP redirect, packet filters, and path MTU
discovery.
Syntax:
disable icmp-redirect address
packet-filter packet-filter-name
path-mtu-discovery
icmp-redirect
Disables ICMP redirects.
packet-filter
Disables a packet-filter.
packet-filter name
Specifies the name of the packet filter to be disabled.
Valid Values: Any configured packet filter
Default Value: None
path-mtu-discovery
Disables Path MTU Discovery.
Enable
Use the enable command to enable ICMP redirects, packet filters, or path MTU
discovery.
Syntax:
enable icmp-redirect address
packet-filter packet-filter-name
path-mtu-discovery
icmp-redirect
Enables ICMP redirects.
interface address
Specifies the interface address.
Valid Values: Any valid IPv6 address
Default Value: Null (specifies all addresses)
packet-filter
Enables a packet-filter.
IPV6 Configuration Commands (Talk 6)
388 MRS V3.2 Protocol Config Ref Vol 2
|
||
||
||
||
||
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|