IBM SC30-3865-04 - Manual (Page 457)

Delete
Use the delete command to remove RIP6 from the specified interface.
Syntax:
delete interface#
interface#
Specifies the interface from which RIP6 protocol is to be removed.
Note: The interface must have RIP6 configured.
Valid Values: Any valid interface number
Default Value: None
Disable
Use the disable command to disable RIP6.
Syntax:
disable rip6
override ...
sending ...
rip6 Disables RIP6 on the specified interface.
Valid Values: Yes or No
Default Value: Yes
Modify RIP6 flags on which interface?
Specifies the interface number on which RIP6 is to be disabled.
Note: The interface must have RIP6 configured.
Valid Values: Any valid interface number
Default Value: 0
override ...
static-routes
Overrides RIP6 static routes on an interface.
Modify RIP6 flags on which interface?
Specifies the interface number on which RIP6 is to be
disabled.
Note: The interface must have RIP6 configured.
Valid Values: Any valid interface number
Default Value: 0
default
Overrides RIP6 default routes on an interface.
RIP6 Configuration Commands (Talk 6)
Chapter 17. Configuring and Monitoring Routing Information Protocol (RIP6) 427
|
|
|
||
|
|
|
|
|
|
|
|
||
||
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|