IBM SC30-3865-04 - Manual (Page 173)

Table 20. Configuration Parameter List - Port Default TG Characteristics (continued)
Parameter Information
Parameter
Propagation delay
Valid Values
Minimum LAN
less than 480 microseconds
Telephone
between .48 and 49.152 milliseconds
Packet switched
between 49.152 and 245.76 milliseconds
Satellite
greater than 245.76 milliseconds maximum
Default Value
For ATM SVCs and ATM PVCs:
Campus ATM best effort
Telephone
Campus ATM reserved
Minimum LAN
WAN ATM best effort
Packet switched
WAN ATM reserved
Telephone
For IP:
Campus
Telephone
WAN
Packet switched
Description
This parameter specifies the propagation delay TG characteristic for all link stations
defined on this port. The propagation delay TG characteristic specifies the approximate
range for the length of time that it takes for a signal to propagate from one end of the
TG to the other.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 143