IBM SC30-3865-04 - Manual (Page 188)

Table 23. Configuration Parameter List - Link Station - Detail (continued)
Parameter Information
Parameter
Local Node ID
Valid Values
5 hexadecimal digits
Default Value
X'00000'
Description
This parameter specifies the local node identifier. This question is asked only if solicit
sscp session is
yes . The local node id must be unique.
Parameter
Local SAP address
Valid Values
Any valid SAP address between X'04' and X'EC'.
Default Value
Value taken from port
Description
This parameter specifies local SAP address.
Notes:
1. This question is displayed only if there are multiple PUs defined on the port.
2. If the local SAP address is not the main local SAP address on the port,
3. the port name and SAP name will display in monitoring and SNMP display output.
Parameter
Subnet visit count
Valid Values
1 - 255
Default Value
Default taken from the equivalent port level parameter
Description
This parameter specifies the default for the maximum number of subnetworks that a
multi-subnet session may traverse.
Note: This question is asked only if the border node function is enabled on this node.
APPN Configuration Commands
158 MRS V3.2 Protocol Config Ref Vol 2