IBM SC30-3865-04 - Manual (Page 416)

Valid Values: A numeric value
Default Value: 1
Via gateway 3
Specifies the IPv6 address of the gateway 3.
Valid Values: Any valid IPv6 address
Default Value: None
Cost Specifies the cost of this route.
Valid Values: A numeric value
Default Value: 1
Via gateway 4
Specifies the IPv6 address of the gateway 4.
Valid Values: Any valid IPv6 address
Default Value: None
Cost Specifies the cost of this route.
Valid Values: A numeric value
Default Value: 1
tunnel Adds a tunnel.
Add a static route through this tunnel?
Specifies whether or not the tunnel will have a static route defined.
Valid Values: Yes or No
Default Value: Yes
IPV6 destination network
Specifies the IPv6 address of the destination network that will be
reached by the tunnel.
Valid Values: Any valid IPv6 address
Default Value: None
Prefix length
Decimal value specifying how many of the leftmost contiguous bits
of the IPv6 address comprise the prefix.
Valid Values: 8 - 128
Default Value: 64
IPv4 tunnel remote address
Specifies the IPv4 address for the IPv6 frames passed through the
tunnel.
Valid Values: Any valid IP (32-bit) address
Default Value: None
IPv4 tunnel local address
Specifies the IPv4 source address for the IPv6 frames passed
through the tunnel.
Valid Values: Any valid IP (32-bit) address
Default Value: None
IPV6 Configuration Commands (Talk 6)
386 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|