IBM SC30-3865-04 - Manual (Page 460)

static-routes
Enables advertisement of RIP6 static routes on an interface.
Valid Values: Yes or No
Default Value: Yes
poisoned-reverse-routes
Enables poison reverse in sending RIP6 updates on an interface.
Valid Values: Yes or No
Default Value: Yes
List
Use the list command to display the RIP6 configuration.
Syntax:
list all
Example:
RIP6 config>list all
Set
Use the set command to set RIP6 configuration parameters.
Syntax:
set rip6-in-metric
rip6-out-metric
rip6-in-metric
Sets the RIP6 metric on incoming RIP6 updates.
Change RIPng metric on which interface?
Specifies the interface number on which RIP6 input metric is to be
set.
Valid Values: Any valid interface number
Default Value: 0
RIP6 input Metric
Specifies the value of the RIP6 metric used on incoming RIP6
updates.
Valid Values: 1 - 15
Default Value: 1
rip6-out-metric
Sets the RIP6 metric used on outgoing RIP6 updates.
Change RIPng metric on which interface?
Specifies the interface number on which RIP6 output metric is to be
set.
Valid Values: Any valid interface number
Default Value: 0
RIP6 Configuration Commands (Talk 6)
430 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|