IBM SC30-3865-04 - Manual (Page 395)

disallowed router-to-router shortcuts
Displays disallowed router-to-router shortcuts.
Example: li dis
Disallowed router-to-router shortcuts for IP
--------------------------------------------
1 8.8.8.1 255.255.255.255
2 6.6.6.1 255.255.255.255
interface definitions
Displays the NHRP interface definitions.
Example: li int
Interfaces explicitly defined for NHRP
--------------------------------------
None
NHRP LANE Shortcut Interface:
--------------------------------------------------
Interface: 3 ESI: burned-in Sel: auto
Use Best Effort: yes (Data)
Cell Rate(kbps): Peak: 0/ 0 Sustained: 1000/538764944
MAC address supplied by NHS is used as source address
cache size
Displays cache sizes.
Example: li ca
Cache Sizes
----- -----
Resolution cache: 10000 entries
Server purge cache: 10000 entries
Server registrations cache: 10000 entries
Set
Use the set command for the following:
Syntax:
set protocol access control usage
attempt shortcuts
holding time
data-rate threshold
extensions ...
cache size ...
shortcuts to atmarp clients
protocol access control usage
Determines if the IP access controls will be checked and, if so, how these
controls will be applied to NHRP packets. See “Protocol Access Control
Usage” on page 356 for more information.
Example: set prot
Use (Destination, Source & Destination, None) [None]?
Valid Values: None, Source and Destination, Destination
Default Value: None
NHRP Advanced Configuration Commands (Talk 6)
Chapter 12. Configuring and Monitoring NHRP 365
|
|
|
|
|
|