IBM SC30-3865-04 - Manual (Page 190)

Table 24. Configuration Parameter List - Station Configuration for ATM (continued)
Parameter Information
Parameter
ATM network type
Valid Values
Campus, Widearea
Default Value
Campus
Description
This parameter specifies the ATM network type.
Parameter
Shareable connection network traffic
Valid Values
Yes, No
Default Value
No
Description
This parameter specifies whether connection network traffic can be routed on the ATM
VC set up this TG.
Parameter
Shareable other protocol traffic
Valid Values
Yes, No
Default Value
No
Description
This parameter specifies whether other higher level protocol traffic can be routed on the
ATM VC set up for this TG.
Parameter
TG Number
Valid Values
0 - 20
Default Value
0
Description
This parameter specifies the TG number for the ATM VC.
APPN Configuration Commands
160 MRS V3.2 Protocol Config Ref Vol 2