IBM SC30-3865-04 - Manual (Page 142)

Table 11. Configuration Parameter List - Inter-process Signals Traces (continued)
Parameter Information
Parameter
Session services
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the session services component.
Parameter
Topology and routing services
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the topology and routing services component.
Table 12. Configuration Parameter List - Module Entry and Exit Traces
Parameter Information
Parameter
Attach manager
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about module entry and exit
information from the attach manager component.
Parameter
Half session
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about module entry and exit
information from the half session component.
APPN Configuration Commands
112 MRS V3.2 Protocol Config Ref Vol 2