IBM SC30-3865-04 - Manual (Page 452)

Summary PIM
Use the summary pim command to display summary information about the PIM
state database.
Syntax:
summary pim
Example:
PIM6>s
Summary PIM State Database
--------------------------
0) Group: FF05:2:3::121
0) Source: 9:1:2:3::12:101
0) States: 1-P 2-P
PIM6>
Group The destination group address associated with the entry.
Source
The source address of the originator of the multicast datagram.
States Displays the interfaces and states associated to the source group pair. P
identifies a prune state.
Ping
Use the ping command to dynamically ping another destination IPv6 address.
Syntax:
ping
Example:
PIM6>ping
Destination IPv6 address [::]? 8::9
Source IPv6 Address [1::8]?
Ping data size in bytes [56]?
Ping TTL [64]?
Ping rate in seconds [1]?
PING6 1::8 -> 8::9: 56 data bytes, ttl=64, every 1 sec.
----8::9 PING6 Statistics----
36 packets transmitted, 36 packets received
See “Ping6” on page 402 for a description of the parameters.
Traceroute
Use the traceroute command to dynamically trace a route.
Syntax:
traceroute
Example:
PIM Monitoring Commands (Talk 5)
422 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|