IBM SC30-3865-04 - Manual (Page 228)

Table 41. Configuration Parameter List - Add TN3270E Implicit (continued)
Parameter Information
Parameter
Pool class
Valid Values
1 or 2, where:
1. Implicit workstation
2. Implicit printer
Default Value
1
Description
This parameter specifies type of LU pool.
Parameter
Station name
Valid Values
A string of 1 to 8 characters:
v First character: A to Z
v Second to eighth characters: A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name representing the link between the DLUR and the PU
or the subarea link over which SNA data will flow.
Parameter
LU Name Mask
Valid Values
A string of 1 to 5 characters:
v First character: A to Z, @, $, and #
v Second to eighth characters: A to Z, 0 to 9
Default Value
@01LU
Description
This parameter specifies the mask to be used to ensure that the LU names will not
duplicate other names in the network.
LU names are generated by appending the NAU address to the end of the LU name
mask. When not specifying an address range, NAU addresses from 2 - 253 will be
checked to see if the address is unused. If the address is available, it will be used.
Otherwise, the next NAU address will be tried.
For example, if the LU name mask is FRED, the possible LU names are [FRED2,
FRED3, ..., FRED253].
APPN Configuration Commands
198 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|