IBM SC30-3865-04 - Manual (Page 272)

handle
user-configurable name that uniquely identifies each remote server.
Example: add interface 0 4508907898 test
Delete
Deletes an X.25 address translation.
Syntax:
delete interface ...
# Specifies the interface number.
remote-X.25-addr
Can include up to 15 digits. If the specified interface has not been
configured using the VINES add interface command, the terminal displays
the message
That X.25 address has not been configured.
Example: delete interface 1 4799999999 compress
Disable
Use the disable command to disable the VINES protocol on all interfaces or a
single interface, or to disable checksumming.
Syntax:
disable checksumming ...
interface ...
vines
checksumming interface#
Disables checksumming on packets that the specified interface generates,
broadcast packets excluded. For all interfaces, the default is checksumming
disabled.
Example: disable checksumming 0
interface interface#
Disables the VINES protocol on the specified interface.
Example: disable interface 1
vines Disables the VINES protocol on all interfaces.
Example: disable vines
Enable
Use the enable command to enable the VINES protocol on all interfaces or a single
interface, or to enable checksumming.
Syntax:
enable checksumming ...
interface ...
VINES Configuration Commands (Talk 6)
242 MRS V3.2 Protocol Config Ref Vol 2