IBM SC30-3865-04 - Manual (Page 209)

Table 31. Configuration Parameter List - Connection Network Configuration for
ATM (continued)
Parameter Information
Parameter
Shareable other protocol traffic
Valid Values
Yes or No
Default Value
No
Description
This parameter specifies whether the ATM VC established for this CN TG may be
shared with other higher level protocols in the router.
Note: The following parameters are forward traffic parameters.
Parameter
Forward Peak Cell Rate
Valid Values
1 to 85% of line speed
Default Value
Taken from the port definition
Description
This parameter indicates an upper bound on the cell transmission rate.
Parameter
Forward Sustained Cell Rate
Valid Values
1 to 85% of line speed
Default Value
Taken from the port definition
Description
This parameter indicates an upper bound on the average cell transmission rate.
Parameter
Forward Tagging
Valid Values
Yes or No
Default Value
Yes
Description
This parameter indicates that cells that are nonconforming to cell loss priority 0 traffic
specification but are conforming to cell loss priority 1 traffic specification are marked
and allowed into the ATM network.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 179