IBM SC30-3865-04 - Manual (Page 175)

Table 20. Configuration Parameter List - Port Default TG Characteristics (continued)
Parameter Information
Parameter
First user-defined TG characteristic
Valid Values
0 to 255
Default Value
128
Description
This parameter specifies the first user-defined TG characteristic for all link stations
defined on this port.
The first user-defined TG characteristic specifies the first of three additional
characteristics that users can define to describe the TGs in a network. The default
value of 128 allows a subset of TGs to be defined as more or less desirable than the
rest without defining values for all TGs.
Parameter
Second user-defined TG characteristic
Valid Values
0 to 255
Default Value
128
Description
This parameter specifies the second user-defined TG characteristic for all link stations
defined on this port.
The second user-defined TG characteristic specifies the second of three additional
characteristics that users can define to describe the TGs in a network.
Parameter
Third user-defined TG characteristic
Valid Values
0 to 255
Default Value
128
Description
This parameter specifies the third user-defined TG characteristic for all link stations
defined on this port.
The third user-defined TG characteristic specifies the third of three additional
characteristics that users can define to describe the TGs in a network.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 145