IBM SC30-3865-04 - Manual (Page 432)

Ping6
Use the ping6 command to ping an IPv6 address.
Syntax:
ping6
Example:
IPV6>ping
Destination IPv6 address [::]? 8::9
Source IPv6 Address [1::8]?
Ping data size in bytes [56]?
Ping TTL [64]?
Ping rate in seconds [1]?
PING6 1::8 -> 8::9: 56 data bytes, ttl=64, every 1 sec.
----8::9 PING6 Statistics----
36 packets transmitted, 36 packets received
Destination IPv6 address
Valid Values: Any valid IPv6 address
Default Value: None
Source IPv6 address
Valid Values: Any valid IPv6 address
Default Value: None
Ping data size in bytes
Valid Values: 0 to size of global buffer
Default Value: 56
Ping ttl
Specifies the time-to-live for the ping.
Valid Values: 1 - 255
Default Value: 64
Ping rate in seconds
Specifies the ping frequency.
Valid Values: 1 - 60
Default Value: 1
Traceroute6
Use the traceroute6 command to dynamically trace a route.
Syntax:
traceroute6 ...
Example:
IPV6>traceroute6
Destination IPv6 address []? 7::8
Source IPV6 address []? 6::9
Data size in bytes [56]?
Number of probes per hop [3]?
IPV6 Monitoring Commands (Talk 5)
402 MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|