IBM SC30-3865-04 User Manual
Page 257
Input ZFilters disabled
Input NFilters (inclusive)
Output ZFilters disabled
Output NFilters disabled
Split-horizon-routing enabled
1
10-19
/ 52 "EtherTalk", "Sales"(Def)
Input ZFilters disabled
Input NFilters (inclusive)
Output ZFilters disabled
Output NFilters disabled
Split-horizon-routing enabled
2
unseeded net
/ 0
Input ZFilters disabled
Input NFilters (inclusive)
Output ZFilters disabled
Output NFilters disabled
Split-horizon-routing disabled
APL2 globally
Indicates whether AppleTalk Phase 2 is globally enabled or disabled.
Checksumming
Indicates whether checksum is enabled or disabled.
Cache size
Number of fastpath cache entries.
List of configured interfaces
Lists each interface number and its network range, node number, and zone
name(s) as well as the default zone.
For each interface also lists whether or not input and output zone filters and
network filters and enabled or disabled. If they are enabled, indicates
whether or not they are inclusive or exclusive.
Input/output Zfilters
Indicates zone filters assigned to an interface. Inclusive means that only
packets matching the filter will be routed. Exclusive means that all packets
matching the filter will be discarded. The name of the zone filtered is
displayed. Input means that the filter is applied to traffic coming into the
interface. Output means that filter is applied to traffic going out to the
interface.
Input/output Nfilters
Indicates net filters assigned to an interface. Inclusive means that only
packets matching the filter will be routed. Exclusive means that all packets
matching the filter will be discarded. The range of networks filtered is
displayed. Input means that the filter is applied to traffic coming into the
interface. Output means that filter is applied to traffic going out to the
interface.
Split-horizon-routing
Shows whether or not split-horizon routing is enabled or disabled on each
interface.
Set
Use the set command to define the cache-size of fastpath or specific AppleTalk
Phase 2 parameters, including the network range in seed routers and the node
number.
Syntax:
set
cache-size . . .
net-range . . .
AppleTalk Phase 2 Configuration Commands (Talk 6)
Chapter 4. Configuring and Monitoring AppleTalk Phase 2
227