Appn configuration commands 118 – IBM SC30-3865-04 User Manual
Page 148
Table 13. Configuration Parameter List - General Component Level Traces (continued)
Parameter Information
Parameter
Session connector
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about general information from
the session connector component.
Parameter
Session services
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about general information from
the session services component.
Parameter
SNMP subagent
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about general information from
the SNMP subagent component.
Parameter
TN3270E Server
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about general information from
the TN3270E Server component.
APPN Configuration Commands
118
MRS V3.2 Protocol Config Ref Vol 2