IBM SC30-3865-04 - Manual (Page 153)

Table 15. Configuration Parameter List - APPN Node Management (continued)
Parameter Information
Parameter
Held alert queue size
Valid Values
0 — 255
Default Value
10
Description
This parameter sets the size of the configurable held alert queue. This queue is used to
save APPN alerts prior to sending them to a focal point. If the queue overflows, the
oldest alerts are discarded.
Table 16. Configuration Parameter List - APPN ISR Recording Media
Parameter Information
Memory Parameters
Parameter
Memory (see table notes)
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables the collection of intermediate session data in the
router’s local memory.
Parameter
Maximum memory buffers
Valid Values
0 to 1
Default Value
1
Description
This parameter specifies the number of buffers to be allocated in the router’s local
memory for storing intermediate session records.
Parameter
Maximum memory records per buffer
Valid Values
0 to 2000
Default Value
100
Description
This parameter specifies the maximum number of intermediate session records that
may be stored in the memory buffer on the router.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 123