IBM SC30-3865-04 - Manual (Page 159)

Table 17. Configuration Parameter List - Port Configuration (continued)
Parameter Information
Parameter
Adjacent node subnet affiliation
Valid Values
v 0 (native)
v 1 (non-native)
v 2 (negotiable)
Default Value
2
Description
This parameter specifies the default for all links through this port as to whether the
adjacent node is in this node’s native APPN subnetwork or in a non-native APPN
subnetwork. A value of
2 instructs the node to negotiate at link activation time to
determine whether the adjacent link station is native or non-native.
Note: This question is asked only if the border node function is enabled on this node.
Table 18. Configuration Parameter List - Port Configuration for ATM
Parameter Information
Parameter
Local ATM Address
Valid Values
Any 14-hexadecimal character string
Default Value
None
Description
This parameter specifies the 7-byte string that comprises the user part of the local ATM
address. The user part is the 6-byte ESI and the 1-byte selector field. This user-part
must be unique with respect to the network part of the ATM address, which is retrieved
from the ATM adapter. The selector must be unique for each protocol type.
Parameter
Enable incoming calls
Valid Values
Yes or No
Default Value
Yes
Description
This parameter determines whether calls will be rejected at the ATM level.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 129