IBM SC30-3865-04 - Manual (Page 140)

Table 11. Configuration Parameter List - Inter-process Signals Traces (continued)
Parameter Information
Parameter
Management Services
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the management services component.
Parameter
Node Operator Facility
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the node operator facility component.
Parameter
Path Control
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the path control component.
Parameter
Presentation Services
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, this
parameter informs the trace facility to include trace data about inter-process signals
from the presentation services component.
APPN Configuration Commands
110 MRS V3.2 Protocol Config Ref Vol 2