IBM SC30-3865-04 - Manual (Page 176)

Table 21. Configuration Parameter List - Port default LLC Characteristics
Parameter Information
Parameter
Remote APPN SAP
Valid Values
Multiples of four in the hexadecimal range of X'04' to X'EC'
Default Value
X'04'
Description
This parameter specifies the SAP associated with an adjacent node’s APPN link
station.
Parameter
Maximum number of outstanding I-format LPDUs (TW)
Valid Values
1 to 127
Default Value
26
Description
This parameter specifies the LLC maximum number of outstanding I-format LPDUs
(TW) for all link stations on this port.
The maximum number of outstanding I-format LPDUs defines the transmit Command
Line option (TW) which is the maximum number of sequentially numbered I-format
LPDUs that the link station may have unacknowledged at any given time.
Parameter
Receive window size
Valid Values
1 to 127
Default Value
26
Description
This parameter specifies the LLC receive Command Line option size (RW) for all link
stations on this port.
The RW parameter specifies the maximum number of unacknowledged sequentially
numbered I-format LPDUs that the link station can receive from the remote link station.
RW is advertised in SNA XID frames and IEEE 802.2 XID frames. The XID receiver
should set its effective TW to a value less than or equal to the value of the received
RW to avoid overruns.
APPN Configuration Commands
146 MRS V3.2 Protocol Config Ref Vol 2