IBM SC30-3865-04 - Manual (Page 168)

Table 19. Configuration Parameter List - Port Definition (continued)
Parameter Information
Parameter
UDP port number for medium priority traffic
Valid Values
1024 to 65535
Default Value
11003
Description
This parameter specifies the UDP port number to be used for medium priority traffic.
Parameter
UDP port number for low priority traffic
Valid Values
1024 to 65535
Default Value
11004
Description
This parameter specifies the UDP port number to be used for low priority traffic.
Parameter
IP network type
Valid Values
Campus or Widearea
Default Value
Widearea
Description
This parameter specifies the IP network type.
Parameter
Local APPN SAP address
Valid Values
Multiples of four in the hexadecimal range X'04' to X'EC'
Default Value
X'04'
Description
This parameter specifies the local SAP address to be used for communicating with
APPN link stations defined on this port.
APPN Configuration Commands
138 MRS V3.2 Protocol Config Ref Vol 2