beautypg.com

IBM SC30-3865-04 User Manual

Page 444

background image

Default Value: None

Hello period

Specifies the number of seconds between Hello messages. On
point-to-point interfaces, this value is ignored. Once the 2210
establishes adjacency, Hello messages are silenced.

Valid Values: 1 - 65535

Default Value: 30

Join prune hold time

Controls messages to inform the receiving device on how long (in
seconds) to hold the state activated by the message. Prunes sent
to the device remain active for this number of seconds.

Valid Values: 1 - 65535

Default Value: 210

preference routetype

This is a configured metric preference to be used in the assert process. It
allows the user to selectively select which unicast route types in the unicast
forwarding tables has precedence over other route types. It is of local
significance only, meaning it is used for this device and all its attached PIM
activated interfaces. This can be used if several unicast routing protocols
are in use by this router, adjacent routers are running different routing
protocols, or route types, such as default routes, are desired over learned
routes.

Routetype can specify the following route types:

v

rip

v

direct

v

fixed

v

default

v

filter

Example:

PIM Config> set preference rip

RIP Metric Preference (hex) [FFFF]?

Metric Preference

This value is sent to other routers in the assert process during
duplicate multicast forwarding detection and is used with route
metric costs to determine which router should be the forwarding
router. All metric preferences are initially set to X'FFFF'.

Valid Values: A 4-digit hexadecimal value

Default Value: X'FFFF'

variables cache_life

Example:

PIM config>set v cache_life

Mcfwd cache Holdtime [60]

Mcfwd cache holdtime

Specifies the amount of time in seconds that a multicast forwarding
entry which has not been used to forward any multicast datagrams
will be allowed to exist in the multicast forwarding cache before it is
removed.

PIM Configuration Commands (Talk 6)

414

MRS V3.2 Protocol Config Ref Vol 2

|

|
|
|
|

|

|

|
|
|
|

|

|

|
|
|
|
|
|
|
|
|

|

|

|

|

|

|

|

|
|

|
|
|
|
|

|

|

|

|

|
|

|
|
|
|
|